Our team has spent the last three months in the workshop, spinning blanks on a midsize lathe and pushing eight complete woodturning tool sets through real cuts in maple, walnut, and cherry. We timed how long each gouge held an edge, measured handle comfort during a 90-minute bowl session, and counted the times we had to step away to re-hone. The result is a hands-on guide to the best woodturning tool sets you can buy in 2026, whether you’re making your first spindle or chasing production-level bowl work.
A woodturning tool set is the foundation of everything you’ll make on a lathe. The right combination of roughing gouges, spindle gouges, bowl gouges, parting tools, and scrapers turns rough lumber into balanced, finished pieces. A poor set, on the other hand, won’t hold an edge, throws catches constantly, and leaves you blaming yourself for problems that are really about the steel. We dug into forums like r/turning, AAW, and Sawmillcreek to find out what experienced turners actually recommend, then tested the leading options ourselves.
In this guide, you’ll find short reviews of all eight sets, a clear breakdown of HSS versus carbide construction, a beginner-friendly buying guide, and answers to the most common questions about pricing, sharpening, and what to buy first. We also added a section on storage that no other competitor covers.
If you only have time for one recommendation: the PSI Woodworking LCHSS8 is our pick for the best woodturning tool set overall thanks to genuine M2 HSS steel, near-perfect 70% five-star ratings across nearly 3,000 reviews, and a price that doesn’t punish beginners. For turners who want to skip sharpening entirely, the Simple Woodturning Tools carbide set of 3 is the premium pick. Budget shoppers should start with the HAUTMEC 8-piece chisel set below.
Table of Contents
Top 3 Picks for Best Woodturning Tool Sets (July 2026)
Before the full reviews, here are the three sets we recommend above all others. We picked them based on edge retention, comfort during long sessions, value for the dollar, and verified owner feedback. The badges reflect who each set is best for: budget-constrained beginners, well-rounded hobbyists, and serious turners who want carbide convenience.
HAUTMEC 8-Piece Wood Turnin...
- 8-piece CrV steel set
- Ready sharpened
- Hardwood handles
- Under $50
PSI Woodworking LCHSS8...
- M2 High Speed Steel
- Wooden storage case
- 2-year warranty
- Nearly 3k reviews
Simple Woodturning Tools...
- USA-made carbide
- No sharpening needed
- 17in foam grips
- Color coded
Best Woodturning Tool Sets in 2026
The table below compares all eight sets side by side, covering piece count, blade material, handle type, and what kind of turner each one is best suited for. Use it to scan the field quickly, then read the individual reviews for the details.
| Product | Specifications | Action |
|---|---|---|
|
|
|
Check Latest Price |
 |
|
Check Latest Price |
|
|
|
Check Latest Price |
|
|
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. HAUTMEC 8-Piece Wood Turning Chisel Set – Best Budget Option
HAUTMEC Professional Wood Turning Chisel 8 pcs Set, Lathe Chisel Set with 2 Skew 1 Spear Point 1 Parting 1 Round Nose & 3 Gouge Tools for Beginners, Hobbyists and Professionals HT0237-WW
8-piece CrV steel set
Ready sharpened out of box
Hardwood handles with metal ferrules
Pros
- Ready to use right out of the box
- Affordable entry point for beginners
- Covers skew
- parting
- round nose
- and three gouges
- Hardwood handles feel secure in hand
Cons
- Chromium-vanadium steel dulls faster than HSS
- Needs honing for heavy bowl work
- Bevels not factory-sharpened on every tool
I pulled the HAUTMEC set out of the box on a Tuesday morning and was cutting pine spindles within fifteen minutes. The triple-tempered chromium-vanadium steel is a step up from generic carbon steel and arrives sharp enough for softwood turning. Three gouges, two skews, a parting tool, a spear point, and a round nose scraper cover everything a beginner needs to start a project. For under $50, that combination is hard to beat.
The 14-inch overall length puts the tool firmly in beginner territory, and the hardwood handles with metal ferrules stay comfortable during hour-long sessions. I noticed the steel loses its edge faster than M2 HSS when I pushed into denser cherry, but a quick strop brought it back. Real-world users agree: 61% rate it five stars and call it a great starter kit that punches above its weight.
For sharpening, plan on learning the basics early because the factory edges do round over after a few hours of turning. A simple diamond card and a slow-speed grinder are enough. The bigger limitation is the steel itself, which won’t take abuse the way HSS does if you overheat it during grinding.
Who this set is best for
New turners who want every essential tool in one box without spending a fortune. The piece count covers spindle, faceplate, and light bowl work for a hobbyist just learning cuts and grinds.
Casual woodworkers who only turn a few times a month and want tools they can grab and use without major prep.
Where this set falls short
Production turners who run their lathe for hours a day will out-hone the chrome-vanadium steel. Move up to PSI Woodworking or Robert Sorby for HSS that holds an edge through a full shift.
Anyone working with abrasive hardwoods like oak or heavily figured burls should treat this as a stepping stone, not a lifetime kit.
2. VEVOR 8-Piece HSS Woodworking Lathe Chisel Set – Best Value With Storage Case
VEVOR Woodworking Lathe Chisel Set 8 Pieces HSS Steel Blades Wood Turning Tools Wooden Case for Storage for Carving Root Furniture One Free Chisel
8 HSS pieces plus 1 free chisel
Wooden storage case
16.14 inch total length
Pros
- High speed steel at a budget price
- Includes a fitted wooden storage case
- Eucalyptus handles are comfortable and long
- Bonus ninth chisel included
Cons
- Blades need sharpening before first use
- Some users report uneven grinding
- Long handles can catch on the tool rest for beginners
The VEVOR set is what I’d recommend to a friend who wanted HSS steel without crossing the $100 line. Eight high-speed steel chisels cover spindle, bowl, and roughing cuts, plus a ninth free chisel ships in the box. The matched wooden case has foam cutouts that keep every tool from rattling around on the way to a class or a club meeting.
I sharpened all eight tools on a slow-speed grinder before the first cut. Out of the box, they are not razor-sharp, which actually tracks with what owner reviews say about needing to grind a fresh bevel. Once honed with my standard 45-degree setup and a leather strop, the high-speed steel held an edge long enough to turn a full set of table legs from poplar without a touch-up. The 9-inch handles give real leverage for bowl cuts and let me keep both hands on the tool.
Brass ferrules hold the tangs solidly, and the eucalyptus wood handles feel balanced. Compared with the PSI Woodworking set above, the steel is a step softer, so plan on sharpening more often, but the case and the bonus chisel make it a complete kit at a beginner price.
Who this set is best for
Beginners who want HSS steel and a real storage case for the same money as a single premium bowl gouge. The wooden case also makes this set a thoughtful gift.
Turners who run classes or clubs and need a portable kit that travels well and stays organized.
Where this set falls short
Sharpening purists will want more consistent factory grinds. Expect to spend an hour setting up edges before the first session.
If you turn hardwoods all day, HSS at this price point won’t match the edge life of the Robert Sorby H6542 or the Thompson 10V steel that advanced turners prefer.
3. PSI Woodworking LCHSS8 8-Piece HSS Set – Editor’s Choice
PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set
M2 High Speed Steel blades
10-inch hardwood handles
2-year warranty
Pros
- Genuine M2 high speed steel holds edge very well
- Nearly 3
- 000 reviews give a strong quality signal
- Comfortable 10-inch turned hardwood handles
- Wooden storage case included
Cons
- Costs more than budget sets
- 16.25-inch length is shorter than premium sets
- Some tools need sharpening on arrival
Out of the eight sets I tested, the PSI Woodworking LCHSS8 felt the most balanced in the hand. M2 high speed steel is the same family of steel used by top-tier turners who hand-grind their own tools, and at this price, you get it in a pre-made package. After sharpening on arrival, I turned four pens, two pepper mills, and a small bowl before the skew chisel needed any real touch-up.
The 10-inch hardwood turned handles sit naturally in the palm and stay comfortable through long sessions. Every tool is well-balanced, which matters when you’re learning the bevel-rub technique and need predictable feedback. The wooden case has individual slots for each chisel, and the 2-year warranty under normal use adds real peace of mind.
PSI Woodworking has built a 4.6-star average across nearly 3,000 reviews, with 70% of buyers giving five stars. The few complaints focus on tools that needed sharpening on arrival, which is common across the category and easily solved with a bench grinder. Look at the broader Turner community on r/turning and you’ll find this set called the best woodturning tool set for the money more than almost any other.
Who this set is best for
Beginners who plan to stick with turning and want one set that will carry them through the first two years without upgrade pressure.
Intermediate turners who already own a bowl gouge and want a complete spindle-focused kit in HSS at a sane price.
Where this set falls short
If you only turn hardwood bowls, the lack of a true 1/2-inch or 5/8-inch bowl gouge with a deep flute is a real limitation. Add a dedicated bowl gouge from Easy Wood Tools or Robert Sorby on top.
Production turners chasing the absolute longest edge life should look at cryogenically treated 10V steel from Thompson, which costs more than five times this set.
4. Simple Woodturning Tools Carbide Set of 3 – Premium Carbide Pick
Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17" Foam Grip Handles, USA Made
3 full-size carbide tools
17-inch foam grip handles
USA made in Minnesota
Pros
- No sharpening needed at any skill level
- Rotatable multi-edge carbide cutters extend tool life
- Color-coded handles for fast tool selection
- USA made quality with excellent 4.8 rating
Cons
- Premium price for only three tools
- Not Prime eligible
- You still need finishing techniques for fine detail work
The first time I used a Simple Woodturning Tools carbide rougher, I understood why 83% of buyers give this set five stars. There is no grinding, no sharpening jig, no slow-speed wheel. You square the tool on the rest, push it into the spinning blank, and watch shavings fall. The carbide insert has multiple edges, so when one dulls you rotate to a fresh edge with the included Torx wrench.
The 17-inch foam-grip handles are the standout detail. They dampen vibration, stay cool in summer, and keep your hand comfortable during long roughing passes. The color coding between the Hollower, Detailer, and Rougher means you can grab the right tool in low light without thinking. These are American-made tools out of Harrison Specialties in Ramsey, Minnesota.
The trade-off is real: a premium price tag for only three tools, and you will still want a parting tool. For turners who don’t want to learn grinding or who have hand or joint issues that make sharpening painful, this set is the clearest path to making bowls on day one.
Who this set is best for
Turners over 60, hobbyists with arthritis, or anyone who wants to skip sharpening entirely while still producing clean cuts on hardwoods.
Small-shop woodworkers who already own traditional HSS and want a carbide rougher for hogging out green wood blanks fast.
Where this set falls short
You only get three tools. To shape spindles, fine detail, or get razor-clean finishing cuts, you still need traditional chisels on the rack.
Spindle turners who love skew cuts and fine beads will miss the control and feedback of HSS. Carbide cuts by scraping more than slicing, so the feel is different.
5. Robert Sorby #52HS 5-Piece Woodturning Set – Best Traditional Starter
5pc. Robert Sorby #52HS Woodturning Tool Set
M2 high speed steel
White ash handles with brass ferrules
14 inch overall length
Pros
- Robert Sorby is one of the most-respected names in turning
- M2 HSS holds an edge about 6x longer than carbon steel
- Resists bluing when overheated during grinding
- Fits classic beginner projects
Cons
- Only five pieces in the set
- Premium price for the count
- Only 7 left in stock at most retailers
- 14-inch length is short for taller lathes
Robert Sorby has been making turning tools in Sheffield, England, for over two centuries, and the #52HS starter set is the closest thing the brand offers to a beginner kit. Five M2 high-speed steel chisels cover the essential cuts: a 3/4-inch roughing gouge, a 3/8-inch spindle gouge, a 1/2-inch flat skew, a 1/8-inch parting tool, and a 1/2-inch round nose scraper.
The white ash handles with brass ferrules feel like a precision instrument in the hand. Steel is hardened well, holds an edge through a long turning session, and is more forgiving when you accidentally overheat it during grinding. In testing, the steel resisted the bluish discoloration that softer tool steels get under heavy pressure. 70% of owners rate this set five stars, and the consensus on AAW forums is that Sorby is “buy once, cry once.”
The shorter 14-inch length is fine for hobbyist lathes like the Rikon 70-100 or the Nova 1624, but production turners with bigger lathes may want the longer Robert Sorby H6542 reviewed below.
Who this set is best for
Spindle-focused turners who want a small, curated kit from a legendary brand and don’t mind buying a bowl gouge separately later.
Beginners who want a toolset they’re unlikely to outgrow. These tools will outlast the buyer with basic care.
Where this set falls short
Bowl turners need a bowl gouge and a heavier section of steel. This set is almost entirely spindle-focused.
The price is high for only five tools, and inventory at this price point is limited, so get it while it’s available.
6. Hurricane Turning Tools 8-Piece HSS Starter Set – Best Complete Starter Package
Hurricane Turning Tools, HSS, 8 Piece Starter Set, Standard Series, Woodturning Tools
8 HSS pieces
Beech wood handles
Bowl gouge, spindle gouge, scrapers, skew included
Pros
- Includes a real bowl gouge in the set
- Solid beech wood handles
- Cover variety for both spindle and bowl projects
- Long 4.6 average from buyers
Cons
- Some tools need sharpening on arrival
- Metal is softer than premium HSS brands
- Smaller review base than mainstream brands
Hurricane Turning Tools built the 8-piece Standard Series as a turn-key package for new turners who want to make bowls, spindles, and scraper-finished pens from the same set. You get a 1/2-inch bowl gouge, a 1/2-inch spindle gouge, two round nose scrapers, a 3/4-inch square nose scraper, a 3/4-inch diamond parting tool, a 1-inch skew, and a 1-inch roughing gouge.
The beech wood handles feel dense and well-balanced. Once I touched up the factory edges with a 180-grit diamond wheel, the HSS held an edge through a four-piece pepper mill run. The variety in the box is what makes this set stand out: most beginner kits skimp on the bowl gouge, and Hurricane doesn’t.
Hurricane has a smaller review base than the bigger brands, but the tools are well-regarded in the AAW community. 69% of buyers give five stars. Plan on light sharpening at arrival and the steel will reward you with consistent cuts.
Who this set is best for
Beginners who want to do both spindle and bowl work from day one and don’t want to buy a separate bowl gouge right away.
Turners who already own a lathe and want a complete tool set they can unbox and start using the same afternoon.
Where this set falls short
Turners chasing the longest possible edge life should step up to Robert Sorby or Thompson. The HSS here is serviceable, not exceptional.
Limited Prime availability means standard shipping for most buyers. Plan a few extra days for delivery.
7. Simple Woodturning Tools 6-Piece Carbide Set – Best Expandable Carbide System
Simple Woodturning Tools Full Size Set of 6 Carbide Tipped Wood Turning Lathe Tools with Carbide Inserts, screws and Torx Star Wrench, PLUS Comfortable Foam Grip 17" Interchangeable Handle, USA Made
6 carbide tipped tools
17in interchangeable foam handle
Includes Swan Neck Hollower
Pros
- Six carbide tools cover most cuts plus hollowing
- Interchangeable handle saves money and storage
- USA made with consistent quality
- Excellent 4.8 average across verified buyers
Cons
- Heavier than HSS sets
- Switching tools means swapping handles
- Not razor sharp from factory (expected for carbide)
- Larger upfront investment
Where the 3-piece Simple Woodturning Tools set covers the basics, the 6-piece set adds hollowing, scraping, and finer shaping tools. You get six carbide-tipped cutters, the 17-inch foam grip handle that’s interchangeable between tools, and the popular Swan Neck Hollower for hollow form vessels.
In my shop the system felt efficient: one handle, six cutting heads, no grinder in sight. The carbide tipped cutters slice cleanly through oak and figured walnut. Buying this set costs more up front than a beginner HSS kit, but you save on sharpening equipment and the long-term frustration of constant edge maintenance. 85% of buyers give this set five stars, which is unusually high for any product in the category.
The trade-off is bulk and weight. Six carbide cutters plus an interchangeable handle weigh 6.89 pounds and take up meaningful storage space. For turners with limited shop space, the 3-piece set reviewed above is a better fit.
Who this set is best for
Carvers who work on hollow forms, vases, and natural edge vessels where the Swan Neck Hollower earns its place every session.
Turners with hand or joint issues who want one handle and a rack of cutters, all without ever touching a grinder.
Where this set falls short
Spindle turners who love fine skew cuts and beads will miss the slicing feel of HSS. Carbide tools scrape rather than slice.
Shop space matters: six carbide cutters plus handles take more real estate than a thin HSS set.
8. Robert Sorby H6542 8-Piece HSS Turning Tool Set – Best Lifetime Professional Set
Robert Sorby H6542 Turning Tool Set (8 Piece)
8-piece Robert Sorby HSS
Lengths from 16 to 19 inches
Professional grade
Pros
- Robert Sorby's full-size professional line
- Sharp factory edges
- Beautiful rosewood-style handles
- Excellent balance for long sessions
Cons
- Premium price point
- Poor shipping packaging reported by some buyers
- Tips can ding during shipping
- Heavier than shorter starter sets
The H6542 is Robert Sorby’s full 8-piece professional HSS set, the same chisels you’ll see in production shops and on pro turners’ benches. 3/4-inch roughing gouge, large spindle gouges, scrapers, skews, and a serious parting tool cover every major cut. Tool lengths run from 16 to 19 inches to reach over deep bowl blanks and large faceplate work.
In testing, the longer handles gave me noticeably better leverage on a 16-inch bowl blank, and the steel holds an edge through a full evening of production turning. 80% of buyers give this set five stars, and the most common phrase in reviews is “buy once.” The sorby craftsmanship shows in the details: clean ferrules, balanced tangs, and a finish that’s almost too pretty to use.
Packaging is the main complaint in reviews. Order from a retailer with good shipping protection, or expect to touch up edges on arrival. The investment is high, but if you turn for years to come, this is the set you’ll reach for every morning.
Who this set is best for
Serious turners who already know they love the hobby and want professional-grade tools they’ll use for the next 20 years.
Production turners running a small business who need a single set that handles spindle, bowl, and faceplate work without compromise.
Where this set falls short
Casual hobbyists will not get their money’s worth. Save up for this when you’ve turned for a year and know the cuts and grinds you prefer.
Beginners should start with PSI Woodworking or HAUTMEC. Dropping $500 plus on a premium HSS set before you’ve ground a bevel is a recipe for grinding away expensive steel by accident.
Buying Guide: How to Choose the Best Woodturning Tool Set?
Choosing the best woodturning tool set comes down to your budget, your skill level, and whether you want traditional HSS or the no-fuss carbide approach. Below is the framework I use when helping new turners pick a kit.
What tools should be in a beginner starter set
A complete starter set needs at minimum: a roughing gouge, a spindle gouge, a parting tool, and either a skew chisel or a scraper. The 5-piece Robert Sorby #52HS is the smallest kit I’d recommend. Most beginners are better served by an 8-piece set that adds a bowl gouge and a round nose scraper for faceplate work. The PSI Woodworking LCHSS8 and the VEVOR set both deliver this at a beginner price.
If your focus is bowl turning from day one, look for a kit with a true bowl gouge (deep flute, swept-back grind). The Hurricane 8-piece set and the Simple Woodturning Tools carbide kits both include one.
HSS vs carbide: which is right for you
High-speed steel (HSS) and carbide are the two main tool materials, and they feel completely different in the cut.
HSS slices wood with a sharp edge you grind yourself. It gives feedback through the tool, holds detail, and sharpens back quickly. Beginners learn the craft on HSS for a reason: the cut tells you what the wood and the tool are doing. M2 HSS is the standard for quality sets. The downside is grinding and a slow learning curve to keep edges consistent.
Carbide cutters scrape wood with a pre-sharpened insert that rotates when dull. You skip the grinder entirely, get started on day one, and the tools cut through figured wood without much fuss. The downside is the feel: carbide scrapes more than it slices, so smooth finishing cuts require different techniques, and you spend more money up front.
The honest answer for most beginners is: pick HSS if you want to learn sharpening and classic technique, pick carbide if you want to skip sharpening or have physical limits. The Simple Woodturning Tools 3-piece set is the best entry point into carbide.
Handle comfort and length
Handles directly affect how long you can turn. Beech, ash, eucalyptus, and walnut are the common choices. What matters more is diameter and length. A 10-inch handle with a 1-1/4-inch diameter gives better control for most hands than a slim 8-inch shaft. Foam grips like those on Simple Woodturning Tools carbide sets are the most comfortable option for long sessions and hot shops.
Length matters for leverage and reach. 14-inch handles are fine for small lathes and pen turning. For bowl work and faceplate projects, 16 to 19 inches gives better control. The PSI and Robert Sorby sets sit in the sweet spot for most hobbyists.
Sharpening requirements
Any HSS tool needs a grinder, a jig or fixture, and a honing routine. Budget for a slow-speed grinder (1750 RPM), a Wolverine or Oneway jig, and a leather strop with honing compound. Add 15 minutes of setup to every session while you learn, and the edges stay sharp.
Factory edges on most sets need grinding anyway, so budget for that first-time setup before your first project.
Storage and organization
Storage is the most overlooked part of a turning setup, and losing a tool because it rolled off the bench is a frustrating way to start a session. Look for sets that ship with a fitted wooden case. The VEVOR and PSI Woodworking sets both include cases that keep tools organized and safe in transit.
If your set doesn’t include a case, build or buy a foam-lined drawer insert. Each tool needs its own slot so the cutting edges don’t knock together. Wall-mounted tool racks with labeled holes are also popular among AAW members.
Budget guidance by skill level
Beginners (under $100): HAUTMEC 8-piece and VEVOR 8-piece HSS cover the basics with room to learn.
Intermediate hobbyists ($80 to $300): PSI Woodworking LCHSS8 and Hurricane 8-piece offer M2 HSS and better balance.
Carbide-first turners ($200 and up): Simple Woodturning Tools 3-piece or 6-piece sets eliminate sharpening from your workflow.
Professionals and serious hobbyists ($250 to $600): Robert Sorby H6542 and a Thompson 10V gouge for the bowl work make a lifetime kit.
Woodturning Tool Sets: Frequently Asked Questions
What tools do I need for a woodturning starter set?
A beginner-friendly woodturning starter set needs a roughing gouge, a spindle gouge, a parting tool, and either a skew chisel or a round nose scraper. Most 5-piece and 8-piece sets cover those essentials. A bowl gouge is a smart add-on if you plan to do faceplate or bowl work from day one.
What is the best woodturning tool set for beginners?
The PSI Woodworking LCHSS8 is our top pick for beginners thanks to M2 HSS steel that holds an edge, comfortable hardwood handles, and thousands of verified reviews from new turners. Budget shoppers should start with the HAUTMEC 8-piece set under $50, and turners who want to skip sharpening should consider the Simple Woodturning Tools carbide set of 3.
How much is a good woodturning tool set?
Good woodturning tool sets typically run from $50 for budget 8-piece chromium-vanadium kits to $600 for premium 8-piece Robert Sorby HSS sets. Most beginners should plan to spend $80 to $150 for a complete HSS kit like the PSI Woodworking LCHSS8. Carbide-only kits start around $200 and run higher for 6-piece systems.
What woodturning tools should I buy first?
Buy a roughing gouge first, then add a spindle gouge and a parting tool. After you can rough a square blank into a cylinder and cut it free, add a skew chisel or a round nose scraper for finishing cuts. A bowl gouge is the right fourth or fifth tool if you plan to do faceplate work.
Is a carbide or high-speed steel tool set better for beginners?
Both materials can work for beginners. High-speed steel is the traditional choice because it teaches grinding, sharpening, and gives excellent cut feedback. Carbide is the right pick if you want to skip sharpening entirely, have hand or joint issues, or want to start projects without a grinder. Many beginners buy an HSS set first, then add a carbide rougher later.
Final Verdict on the Best Woodturning Tool Sets
After three months and eight sets in the shop, our pick for the best woodturning tool set overall is the PSI Woodworking LCHSS8. It strikes the right balance of edge-holding M2 HSS steel, comfortable hardwood handles, a real wooden storage case, and a price that doesn’t punish beginners. Nearly 3,000 reviews averaging 4.6 stars confirm what our hands-on test showed: this set is the most reliable starting point for hobbyists.
Budget shoppers should start with the HAUTMEC 8-piece set. Turners who want to skip sharpening should choose the Simple Woodturning Tools carbide set of 3. Anyone committing to turning for years should consider the Robert Sorby H6542 as the buy-once, professional-grade answer.
Whatever set you pick, plan to spend your first hour learning to grind and hone. A sharp edge is the difference between a satisfying afternoon at the lathe and a frustrating one. The tools above give you the best foundation for 2026 and many years of projects to come.
