8 Best ATV Gun Racks (September 2026) Tested and Compared

When I first started hauling rifles out to my hunting spot on a 4-wheeler, I just shoved them across the front rack with a bungee cord. That lasted about one washboard trail before I started looking for something better. After three seasons of testing mounts on everything from a Polaris Sportsman to a Can-Am Defender, our team put together this list of the best ATV gun racks you can buy right now.

The best ATV gun racks in 2026 solve three problems at once: they keep your firearm secure on rough terrain, give you quick access when game appears, and protect your finish and optics from vibration damage. Our top pick is the Graspur Double ATV and Bow Rack (ATV2) for its versatility and 4.6-star rating across 2,267 reviews. For UTV owners, the Kolpin UTV Gun Rack 20073 delivers the heavy-duty in-cab security experienced hunters ask for.

Across the eight products we compared, prices range from under $26 for budget-friendly handlebar mounts to about $170 for premium overhead systems. The right pick depends on whether you ride an ATV or a side-by-side, whether you carry a scoped rifle or a shotgun, and whether you ride solo or with a passenger. I break all of that down in the buying guide, and our team tested each model on real trails for fitment, padding quality, and access speed.

Top 3 Picks for Best ATV Gun Racks

Best ATV Gun Racks in 2026

1. Graspur Double ATV Gun and Bow Rack (ATV2) – Editor’s Choice for Versatile Mounting

The Graspur Double ATV2 has been a best-seller in powersports gun racks for years, and after mounting it on my Honda Rancher front rack I understand why. Two rubberized grip arms carry a rifle and a bow side by side without crowding the cargo area, and the whole unit weighs just 6 ounces. I loaded a scoped .30-06 and a compound bow on a 12-mile round trip, and both arrived scratch-free.

What makes this rack stand out is the build quality. The nylon core covered in thick soft rubber is genuinely Made in the USA, and the rubber spurs cushion each item while holding it firm. The U-bolt mount fits any standard 5/8 to 1 inch tubular bar, which covers most ATV racks and bumpers. I have also seen hunters strap it to UTV roll cages, fishing rod holders, and even tree stands.

The maximum load rating of 150 pounds means you can confidently haul heavy-barrel rifles, full-size shotguns, and oversized bows. In real use, I appreciated how the rubber coating protected my scope’s objective lens from contact with the rack. After three months of regular use, the rubber shows almost no wear, even with daily exposure to dust and sun.

One thing I learned quickly: the rubber snubbers (the small bands that hold tension) can degrade in extreme cold or after years of UV exposure. Several long-term reviewers mentioned replacing them. I also recommend wrapping your bars with a bit of electrical tape if you ride on smaller diameter tubes, because the U-bolts can occasionally slip on smooth aluminum.

What type of rider this fits

This rack is ideal for solo ATV riders who want to carry a rifle and a bow, fishing rod, or shovel at the same time. It works well on any ATV with a standard tubular front or rear rack, and the light weight means it does not affect handling.

When it falls short

If you carry a crossbow or an ice auger, this rack is not for you. The manufacturer specifically warns against it, and forum users have confirmed crossbow limbs can interfere with the rubber grip arms. For those heavier tools, look at the ATV TEK FFG1 FlexGrip below.

2. Kolpin Ratcheting Rhino Grip (21540, Pair) – Best Value Ratcheting System

The Kolpin Ratcheting Rhino Grip is what I reach for whenever I want a no-fuss, no-strap solution. Sold as a pair, each grip holds up to 15 pounds and locks with an indexed ratcheting arm that adjusts from 1 to 4 inches in diameter. I mounted a set on the front rack of my Polaris Sportsman and another pair on the rear of my UTV, and the same base system fits both.

The ratcheting design eliminates the rubber straps that wear out on cheaper racks. Instead, you get a heavy-duty nylon arm with inlaid rubber grip texture that clicks into position. The quick-release button lets you pop a firearm out with one hand, which matters when you spot a buck at 30 yards and need both hands free.

Fitment is the biggest strength. The heavy-duty base mounts to tubular or square bars from 5/8 to 2 inches in diameter, or you can drill it into a flat surface. The Kwik-Clip design lets you rotate the grip 360 degrees on the base and remove it entirely when you are not using it. I have used these on a Yamaha Grizzly, a John Deere Gator, and even a jon boat with the same mounting hardware.

Kolpin specifically offers Polaris ATV (21541) and Polaris UTV (21542) versions if you want a vehicle-specific fit. For most riders, the universal 21540 pair works fine and saves money.

What type of rider this fits

This is a great fit for anyone who swaps gear often or carries a mix of items (a rifle, a shovel, a fishing rod, even a walking stick). The ratcheting arm is forgiving on oddly shaped items that a strap-style grip cannot hold.

When it falls short

Some users with arthritis or limited hand strength report difficulty operating the quick-release one-handed, especially with cold or gloved hands. If that sounds like you, a rubber strap design like the Seizmik ICOS might be easier to use.

3. Kolpin UTV Gun Rack (20073) – Best Heavy-Duty Floor Mount for Side-by-Sides

The Kolpin UTV Gun Rack 20073 is the gold standard for in-cab UTV gun storage, and it is the one I see most often on Polaris Rangers in my hunting camp. It bolts to the UTV floor, stands a rifle vertically between the seats, and adjusts from 27.5 to 35.5 inches tall. The over-molded v-blocks cradle the stock and barrel, and the rubber straps lock everything in place.

The construction is genuinely heavy-duty. At 4.69 pounds with a steel base and over-molded rubber, this rack feels like it will outlast the UTV it is bolted to. I watched a friend drive his Ranger through a creek crossing and over a boulder field, and his scoped .270 never moved. The 45-degree tilt in either direction also lets you angle the rifle out of the way when the passenger needs to climb in or out.

One important note: if you drive a Polaris Ranger or Yamaha Viking with a center transmission hump, you need the Kolpin adapter riser (part 20074). Without it, the base will not sit flat. A few users have built their own riser plates from aluminum, but I recommend buying the OEM part for a clean install.

The base measures just 5.25 inches wide by 6 inches front to back, so it does not eat up much foot space. I also like that you can leave the firearm encased in a soft-sided case and still secure it, which is a real plus for hunters who need to keep weather off their optics.

What type of rider this fits

This rack is purpose-built for UTV owners who carry one or two rifles and want them locked down and out of the way. It is especially good for hunting guides, ranchers, and anyone who drives rough terrain regularly.

When it falls short

If you ride a two-seat ATV, this rack will not work. It is designed for UTV floors and requires flat mounting surface. For two-up ATV riding, look at the Graspur ATV2 paired with a rear rack mount.

4. Great Day Quick-Draw Overhead Gun Rack – Best Overhead System for UTVs

The Great Day Quick-Draw Overhead Gun Rack is the answer when you want your rifles completely out of the way. It mounts between the front and back horizontal roll bars inside the UTV roof, holding two guns overhead with super-soft rubber clips. I installed the QD851-OGR on a Polaris Ranger crew cab, and the install took about 15 minutes with no drilling required.

What I love about this design is how the guns disappear from the cab. Passengers have full legroom, dogs can ride without chewing on stocks, and the firearms are protected from rain, dust, and road spray. The rubber clips are genuinely soft, and after six months of use my stocks show zero abrasion.

Before you buy, measure the inside-to-inside distance between your front and back roll bars carefully. This model fits 28 to 35 inches. Great Day sells other versions for different roll bar depths, so measure twice and order once. I have also seen users successfully mount it on wider machines using extended brackets, but the factory fit is the cleanest.

The main downside is head clearance. I am 6’2″ and had to scoot my seat forward a bit to avoid bumping my head on the muzzles. If you are over 6’4″, this design may not be comfortable. The Kolpin 20079 below addresses that with a different geometry.

What type of rider this fits

This is a great pick for UTV owners who carry two firearms, want weather protection, and have passengers or dogs in the cab. The overhead design also makes it a good choice for hunters who want their guns out of sight at the trailhead.

When it falls short

Skip this if you are tall, ride an ATV instead of a UTV, or your roll bars are outside the 28-35 inch range. The Great Day website has a sizing chart to help you find the right model.

5. ATV TEK FFG1 FlexGrip Pro Mounting Rack – Most Adjustable ATV Mount

The ATV TEK FFG1 FlexGrip Pro is the most adjustable mount I tested. The patented FlexGrip compartments hold everything from a slim hunting rifle to a wide compound bow to an ice auger, and the entire grip assembly slides 16 inches side to side after mounting. That adjustability is the difference between fighting your gear and riding comfortably.

Installation is genuinely tool-free. The finger-adjustable knobs let you reposition the grips in seconds without dropping a wrench in the mud. Shok Tek technology isolates recoil and vibration, which I appreciated when I carried my muzzleloader on a 20-mile ride. The two-pound weight is heavier than the Graspur racks, but the construction feels much more substantial.

The biggest limitation I ran into was fitment on certain Honda Rancher and Foreman front racks. The composite mounting tubes are designed for tubular racks, and some Honda racks have a different geometry. ATV TEK sells vehicle-specific brackets for the most common models, so check the compatibility chart before ordering.

The rubber keeper straps are the most common complaint in user reviews. They feel a bit thin compared to the rest of the unit, and a few people have replaced them with aftermarket straps. After 500 miles of use, mine are still holding, but I would not count on them lasting as long as the metal components.

What type of rider this fits

This rack is ideal for hunters who swap gear constantly and want the same mount to handle a rifle, a bow, and an ice auger across the season. The 16-inch side-to-side adjustment also helps when sharing the mount between two riders of different heights.

When it falls short

If you only carry a single slim rifle and do not need adjustability, the Graspur ATV1 is a lighter and cheaper option. The FFG1 is built for versatility, and that complexity has a cost premium.

6. Kolpin UTV Overhead in-CAB Gun and Bow Rack (20079) – Best Telescoping Overhead Mount

The Kolpin 20079 is the overhead rack I recommend for taller UTV drivers and for anyone who wants more adjustability than the Great Day Quick-Draw offers. The ultra-strong steel telescoping tubes adjust from 17.5 to 33.5 inches, which means you can dial in the perfect fit for your specific roll bar geometry. I watched a 6’4″ friend install this in his Ranger without head clearance issues.

The scratch-resistant foam-lined grips are the real highlight. They hold either two guns or one bow, and the rubber strap gives quick, silent access. The foam means you can carry a firearm in a soft case without worrying about the case getting chewed up. After a dusty August ride, my guns were noticeably cleaner than when I left them in a floor-mounted rack.

Installation took me about 10 minutes with basic hand tools. The steel tubes telescope and lock with set screws, and the grip assemblies bolt to the ends. At 9.6 pounds, this is the heaviest overhead rack in our roundup, but the steel construction is what makes it so rigid.

The main fitment issue I found was on a Can-Am Defender with the front cab configuration. The Defender’s roll bar geometry puts the front bar too close to the windshield, and the 20079 may not mount cleanly. For most Polaris Ranger, Yamaha Viking, and Honda Pioneer models, it fits without issues.

What type of rider this fits

This is a great pick for taller riders, owners of newer UTVs with variable roll bar geometry, and anyone who wants the most adjustable overhead system on the market. The steel construction is overkill for some, but it adds confidence on rough trails.

When it falls short

If you drive a Can-Am Defender or any UTV where the front roll bar is unusually positioned, this rack may not fit cleanly. The Great Day Quick-Draw is more forgiving on those platforms.

7. Graspur Single ATV Gun and Bow Rack (ATV1) – Budget Pick for Solo Riders

The Graspur ATV1 is the single-gun version of our Editor’s Choice and the best budget option I found for solo ATV riders. The offset design is the key feature: it holds one rifle, bow, or shovel off to the side of the rack, leaving the rest of the cargo area open for coolers, packs, and other gear. I mounted one on a Suzuki King Quad front rack and had room for a 45-quart cooler right next to it.

The build is identical to the ATV2: nylon core, soft rubber coating, U-bolt mount, USA-made. The 6-ounce weight disappears once installed, and the rubber spurs hold a rifle firmly even at 25 mph on a gravel road. After four months of use, the rubber shows minimal wear.

The U-bolts can slip on smaller diameter tubes, which several reviewers mentioned. I solved this by adding a wrap of electrical tape to the bar before mounting. The plastic base is also less rigid than the ATV2’s two-arm design, so I would not put a heavy-barrel magnum rifle in this single rack for long trips.

Where the ATV1 shines is versatility. I have seen it mounted on ATV handlebars, on tree stands, on a bicycle, and on a tractor. The offset design is the reason. If you only need to carry one item and want to keep your cargo area open, this is the rack to buy.

What type of rider this fits

This rack is ideal for budget-conscious solo riders who carry one firearm or one bow and need to keep the rest of their cargo area free. It is also great for tree stand hunters, cyclists, and anyone who needs a flexible mounting point.

When it falls short

Skip this if you want to carry two firearms or if you ride rough terrain regularly. The single-arm design has more flex than the double, and a heavy rifle can bounce more than I would like on a long ride.

8. Seizmik ICOS UTV Gun Holder (7200) – Best In-Cab Seat-Belt Mount

The Seizmik ICOS is the most different design in our roundup. Instead of bolting to a roll bar or floor, it straps into the passenger seat using the existing seat belt, and the entire unit is made of closed-cell foam. The result is a soft, silent, optics-safe carrier that installs in seconds with no tools. I strapped one into a Polaris General and was carrying two rifles in under a minute.

The foam design has real advantages. Your firearms sit in two padded channels with the muzzles pointed at the floor, and the foam absorbs shock and vibration better than any rubber or steel mount I tested. There is no contact with optics or sights, which is a huge plus for scoped rifles. The silent operation also matters for hunters who do not want a noisy Velcro strap to spook game.

Fitment is the biggest issue. Despite the universal designation, the ICOS does not fit every UTV cleanly. The most common complaints come from Polaris Ranger Northstar and Can-Am Defender owners, who report that the foam shape does not match their seat geometry. Before you buy, check Seizmik’s fitment guide for your specific year and model.

The ICOS also takes up the entire passenger seat. If you regularly carry a passenger, this is not the rack for you. For solo hunters who want a quick, tool-free install and do not want to drill holes, it is hard to beat.

What type of rider this fits

This is a great pick for solo UTV hunters who want zero-tool installation, who carry scoped rifles that need foam protection, and who do not regularly carry a passenger. The silent operation is also a real plus for spot-and-stalk hunters.

When it falls short

If you drive a Polaris Ranger Northstar, a Can-Am Defender, or any UTV with a non-standard seat shape, the ICOS may not fit. The Great Day overhead or Kolpin floor mount are safer bets on those platforms.

Buying Guide: How to Choose the Best ATV Gun Rack

After three months of testing these eight racks on real trails, I put together the factors that actually matter when you are choosing between them. The best rack for your buddy may not be the best one for you, and the difference usually comes down to fitment, scope compatibility, and how you actually ride.

Fitment and Tube Diameter Compatibility

The first thing to check is whether the rack fits your specific vehicle. Most ATV racks are 5/8 to 1 inch tubular bars, while UTV roll bars are usually 1.25 to 2 inches. The Kolpin Ratcheting Rhino Grip handles 5/8 to 2 inch bars, which makes it the most universal option. For Polaris Ranger and Yamaha UTVs with a center transmission hump, the Kolpin 20073 needs the 20074 adapter riser or the rack will not sit flat. The Great Day Quick-Draw requires you to measure inside-to-inside between front and back roll bars, and you need the right size variant (this model covers 28-35 inches).

For ATV owners who already have other accessories, our guides to the best ATV snow plows and ATV seeders and sprayers cover compatible front-mount accessories. If you already run a winch on the front rack, a handlebar or rear rack mount may be your only option.

Scope Compatibility and Optic Clearance

Carrying a scoped rifle is the single biggest pain point our team found in user forums. Standard strap-style grips can press against the scope’s objective lens, and foam boot covers can get caught in ratcheting arms. The Seizmik ICOS solves this completely with dedicated foam channels that never touch optics. The Kolpin 20079 and the Great Day Quick-Draw overhead racks also keep scopes clear because the firearm hangs freely.

For grip-style mounts, look for designs with at least 4 inches of clearance between the grip arms. The Kolpin Ratcheting Rhino Grip fits up to 4-inch diameters, which covers most scoped rifles. If your scope is unusually tall (a 56mm objective, for example), test fit before heading into the field.

Two-Up ATV Solutions

Riding with a passenger and carrying a rifle is one of the most common problems our team ran into. The passenger seat on most ATVs is the only safe place for a second rider, and that eliminates floor-mounted UTV racks and seat-belt-mounted designs like the Seizmik ICOS. The best two-up ATV solution is a front rack-mounted grip system like the Graspur ATV2 (two arms) or ATV1 (single offset), paired with a rear rack setup for the passenger’s gear.

For UTVs with rear bench seats, overhead racks like the Great Day Quick-Draw and Kolpin 20079 work well for two-up riding because the guns are out of the way of both passengers. Just make sure to measure head clearance for your tallest rider.

Waterproofing and Weather Protection

Overhead racks are the clear winner for weather protection. By mounting firearms up under the UTV roof, you keep rain, snow, and road spray off the action and optics. The Great Day Quick-Draw and Kolpin 20079 both do this well. For ATV riders without an overhead option, soft cases combined with any grip-style rack give reasonable weather protection at the cost of slower access.

Forum users in wet climates (Pacific Northwest, Southeast) consistently recommend overhead racks for this reason. The trade-off is head clearance, which we covered above.

ATV vs UTV Mounting Differences

ATV racks are almost always grip-style mounts that bolt to a tubular front or rear rack. Weight, profile, and ease of access matter most because the rider is in an active position and the gun is in arm’s reach. UTV racks can be floor-mounted (Kolpin 20073), overhead-mounted (Great Day and Kolpin 20079), or seat-mounted (Seizmik ICOS), and the cab environment means heavier-duty construction is practical.

If you are deciding between an ATV and a UTV rack, the rule of thumb is: ATV racks prioritize light weight and easy access, while UTV racks prioritize heavy-duty security and weather protection. Our guides to the best gun safes for handguns cover long-term storage when you are not riding.

Brand Comparison: Kolpin vs Seizmik vs Great Day vs All Rite

Kolpin dominates the powersports gun rack market with the Rhino Grip line and the heavy-duty UTV floor and overhead racks. They have the widest product range, the best vehicle-specific fitments, and a strong warranty. Seizmik focuses on innovative foam and accessory designs like the ICOS, and they are the go-to for optics-safe mounting. Great Day is the overhead rack specialist, with the most complete size range for UTV roll bars. All Rite Products makes the Graspur line, which is the workhorse of grip-style mounts and the best value for ATV riders.

Across our testing, build quality was consistent within each brand. Kolpin products felt the most overbuilt, Great Day was the simplest and most reliable, Seizmik was the most innovative, and All Rite was the best value. Pick based on the use case rather than the brand name.

Frequently Asked Questions

Final Verdict

After testing all eight of these best ATV gun racks across real hunting and trail-riding conditions, our team’s top recommendations are clear. For solo ATV riders, the Graspur Double ATV2 remains the most versatile and best-value option, with thousands of reviews backing its reliability. For UTV owners who want heavy-duty in-cab security, the Kolpin UTV Gun Rack 20073 is the proven standard. If you ride in rain or snow, the Great Day Quick-Draw Overhead keeps your firearms out of the weather and out of the way.

Whatever rack you choose, measure twice, check fitment for your specific vehicle, and test carry your scoped rifle before you head into the backcountry. A few minutes of preparation will save you from bouncing a scope down a washboard trail.