10 Best Pedalboard Power Supplies (May 2026) reviews

Nothing ruins a great guitar tone faster than unwanted noise creeping into your signal chain. That high-pitched whine, the dreaded ground loop hum, or the digital clock noise from your fancy delay pedal can turn a pristine studio recording into a frustrating mess. After 15 years of gigging and countless hours in home studios, I have learned that the culprit is usually not your expensive overdrive or boutique reverb. It is almost always the power supply.

A quality isolated pedalboard power supply is the foundation of any serious guitar rig. Unlike cheap daisy chains that share power between pedals and create ground loops, isolated supplies give each pedal its own clean power source. This eliminates interference, reduces noise, and lets your effects sound exactly as the designers intended. We spent three months testing the best pedalboard power supplies for guitarists, measuring current draw, noise floors, and build quality across 10 top-rated units.

Whether you are building your first pedalboard or upgrading a touring rig, the right power supply will transform your tone. In this 2026 guide, I will share detailed hands-on reviews of every unit we tested, explain what makes isolated outputs worth the investment, and help you calculate exactly how much current your pedals need. Let us power up.

Top 3 Picks for Best Pedalboard Power Supplies in 2026

Before diving into detailed reviews, here are our top three recommendations based on extensive testing. These power supplies represent the best balance of features, reliability, and value for most guitarists.

Best Pedalboard Power Supplies for Guitarists in 2026

Here is a quick comparison of all 10 power supplies we tested. This table covers the key specifications you need to know when making your decision.

1. Voodoo Lab Pedal Power 2 Plus – Industry Standard Isolated Power

I have been using the Voodoo Lab Pedal Power 2 Plus on my main touring board for over eight years. This unit has crossed the country with me dozens of times, survived baggage handlers, and never let me down once. The 8 isolated outputs deliver clean, noise-free power that completely eliminated the ground loop hum I used to battle with my old daisy chain setup.

What sets this supply apart is the toroidal transformer inside. Unlike switching power supplies that can introduce high-frequency noise, this linear design provides pure, stable current. When I A/B tested my board with the Voodoo Lab versus a budget supply, the difference was immediately obvious. The noise floor dropped significantly, and my high-gain pedals sounded clearer with better note definition.

The build quality is exceptional. This thing is built like a tank with a metal chassis that can take serious abuse. The 5-year warranty from Voodoo Lab shows they stand behind their products. At 3.1 pounds and 11 inches long, it is not the smallest unit, but it fits perfectly under my Pedaltrain Classic 2 board.

One feature I particularly appreciate is the power sag option on two of the outputs. This simulates a dying battery, which can give certain fuzz and overdrive pedals a more organic, vintage character. It is a thoughtful touch that shows Voodoo Lab understands what guitarists actually need.

Each output provides up to 250mA, which handles most analog pedals and many digital units. For extremely high-current pedals like the Strymon Timeline or Eventide H9, you can combine outputs using a current doubler cable. I run my entire 8-pedal board including a digital delay and reverb without any issues.

Who Should Buy This

This power supply is ideal for gigging musicians and studio professionals who need bulletproof reliability. If you play live regularly or record professionally, the Pedal Power 2 Plus gives you peace of mind that your power will not fail mid-performance. It is also perfect for players using a mix of analog and digital pedals who need clean, isolated power.

Who Should Skip This

If you have a very compact pedalboard or only use 3-4 pedals, the Pedal Power 2 Plus is probably overkill. The size and price make more sense for medium to large boards. Budget-conscious beginners might prefer starting with something like the MXR DC Brick or even a quality daisy chain until they build a larger collection.

2. Truetone 1 SPOT Pro CS7 – Best Value for Most Guitarists

The Truetone 1 SPOT Pro CS7 hits the sweet spot between features, quality, and price that makes it our best value recommendation for 2026. At around $170, you get 7 fully isolated outputs including two high-current 500mA ports that can handle demanding digital pedals without breaking a sweat.

I tested the CS7 with a mixed board of analog overdrives and digital effects including an HX Stomp. The high-current outputs powered the modeler without any issues, and the isolated design kept everything whisper-quiet. The global voltage input means you can tour internationally without worrying about power compatibility. Just plug it in anywhere from Tokyo to London.

What impressed me most during testing was how cool the unit runs. Unlike some linear supplies that generate significant heat, the CS7 uses efficient switching technology. After a four-hour gig in a warm venue, the power supply was barely warm to the touch. This suggests better long-term reliability compared to units that run hot.

The included mounting brackets work perfectly with Pedaltrain boards, and the steel chassis feels substantial without being unnecessarily heavy. At just 1 pound, this is one of the lighter professional-grade supplies we tested. The detachable 3-prong power cable is much safer than wall wart designs that can pull out accidentally.

Truetone includes a comprehensive cable kit with various lengths and adapters. I had no trouble reaching every pedal on my board, though some users with larger setups might want longer cables. The lifetime warranty is exceptional in this price range and shows Truetone’s confidence in their build quality.

Who Should Buy This

The CS7 is perfect for gigging musicians who need professional isolated power without spending $250 or more. If you run a medium-sized board with 5-7 pedals including some digital effects, this supply gives you everything you need. International touring musicians will appreciate the automatic voltage switching.

Who Should Skip This

If you have a very low-profile pedalboard with minimal clearance underneath, the CS7’s height might be an issue. Truetone’s CS6 is specifically designed for these situations. Players with 10+ pedals will need the larger CS12 instead. Those who want an on/off switch on the unit itself rather than using a power strip should also look elsewhere.

3. Truetone 1 SPOT Pro CS6 – Best for Compact Pedalboards

The Truetone 1 SPOT Pro CS6 solved a problem that plagued compact pedalboard users for years. Most professional isolated power supplies are too tall to fit under slanted boards like the Pedaltrain Nano+. At under 1.25 inches tall, the CS6 slides under these low-clearance boards with room to spare.

I tested this unit on a Pedaltrain Nano+ with a tight 4-pedal setup. The included mounting template made installation straightforward, and the slim profile meant I could actually close my soft case without crushing anything. The 6 isolated outputs provided clean power with zero ground loop noise, just like its bigger brother the CS7.

The voltage flexibility is impressive for such a compact unit. You get two standard 9V outputs, two switchable 9V/12V outputs, and two switchable 9V/18V outputs. This covers virtually any pedal you might want to use, from standard overdrives to high-voltage fuzz boxes. I even powered an 18V Fulltone pedal with excellent results.

While the CS6 lacks the 500mA high-current outputs of the CS7, you can still power a Line 6 HX Stomp or similar device using a current doubler cable that combines two outputs. Most players buying this supply for a small board will not need to power high-draw digital units anyway.

The lightweight 1.3-pound chassis is easy to mount with Velcro if you prefer not to drill your board. I used industrial-strength Velcro for three months of weekly gigs without any movement. The lifetime warranty gives peace of mind for a unit you will likely take to many practices and shows.

Who Should Buy This

This is the ideal power supply for players with compact pedalboards who refuse to compromise on power quality. If you have a Pedaltrain Nano+, Metro, or similar small board with limited under-mount clearance, the CS6 is your best option for professional isolated power. It is perfect for grab-and-go rigs and players who value portability.

Who Should Skip This

If you have more than 6 pedals or need to power high-current digital units regularly, look at the CS7 or CS12 instead. The lack of dedicated 500mA outputs limits its usefulness for players running amp modelers or multi-effects. Those with flat-mount large boards can use taller supplies that offer more features.

4. CIOKS DC7 – Premium Choice for Power-Hungry Boards

The CIOKS DC7 is the executive-level power supply for players who refuse to compromise. With 48 watts of total power and 660mA available at each of its 7 isolated outlets, this unit can handle literally any pedal you throw at it including power-hungry DSP effects and amp modelers.

During testing, I connected an Eventide H9, Strymon Timeline, Line 6 HX Stomp, and four analog pedals simultaneously. The DC7 powered everything without breaking a sweat. No current doubler cables needed, no voltage concerns, just pure reliable power. The four selectable voltages per outlet (9V, 12V, 15V, 18V) give you more flexibility than any other supply we tested.

What makes the DC7 unique is that it uses a standard IEC power cord instead of an external brick. This keeps your pedalboard setup cleaner and eliminates the failure point of a separate power adapter. The ultra-slim 1-inch profile fits under any board, and the included Flex cables are high quality with secure RCA phono connections.

The multi-stage filtering in the DC7 produces some of the cleanest power we measured. High-gain pedals that typically reveal power supply noise stayed whisper-quiet even at aggressive gain settings. For recording studios where noise floors are critical, this level of clean power is worth the investment.

CIOKS includes pre-drilled mounting holes compatible with Temple Audio boards and includes brackets for other popular brands. The 5-year warranty matches Voodoo Lab’s offering and shows this is built to last. Expandability options let you add more outlets if your board grows beyond 7 pedals.

Who Should Buy This

The DC7 is for professionals and serious enthusiasts who need maximum power and flexibility. If you run multiple high-current digital pedals, amp modelers, or experimental effects that require various voltages, this supply eliminates all power concerns. Recording engineers and touring professionals who demand the absolute best will appreciate the DC7’s capabilities.

Who Should Skip This

At nearly $290, the DC7 is serious overkill for players with simple analog boards. The non-standard RCA connections mean your existing cables and adapters may not work, requiring investment in CIOKS accessories. Budget-conscious players and those with modest power needs should look at the CS7 or Voodoo Lab options instead.

5. CIOKS SOL – Compact Powerhouse for Small Boards

The CIOKS SOL brings flagship-level power to compact setups. Despite having only 5 outlets, each one delivers the same 660mA high-current capability as the larger DC7. This means you can run a small board with a power-hungry digital centerpiece like an HX Stomp without needing current doubler cables.

I tested the SOL on a minimalist board with five pedals including a Strymon Cloudburst and some analog drives. The power was pristine, with the same ultra-low noise performance that impressed us with the DC7. The 4 selectable voltages per outlet meant I could run my 18V fuzz pedal alongside standard 9V effects without any adapters or workarounds.

The compact SFX form factor fits perfectly under a Pedaltrain Nano+ or similar small board. At just 16 ounces, it adds minimal weight to your rig. CIOKS includes mounting hardware for both Pedaltrain and Temple Audio boards, making installation straightforward.

Like the DC7, the SOL uses RCA phono connections instead of standard barrel plugs. The included 9 Flex cables cover most needs, but you will need to stick with CIOKS accessories for any additions. The multistage filtering keeps noise at bay even when running high-gain distortion pedals.

With a 5-year warranty and FCC/CE certification, this is a professional-grade unit despite its smaller size. The build quality matches CIOKS’ reputation for reliability. For players who want the best possible power for a streamlined 4-5 pedal setup, the SOL delivers without wasting space or money on unused outputs.

Who Should Buy This

The SOL is ideal for players building a small high-quality board who need isolated power that can handle any single pedal. If you run 4-5 pedals including one digital centerpiece like an HX Stomp or Eventide H9, this gives you flagship power in a compact form. It is perfect for fly-date rigs and minimalist setups.

Who Should Skip This

If you have more than 5 pedals or plan to expand your board soon, the SOL’s limited outlets will frustrate you. The price per outlet is higher than larger units, making it less economical for growing collections. Players with all-analog boards do not need this much current capacity and can save money with other options.

6. Strymon Zuma – Expandable High-Current Solution

Strymon built their reputation on pristine digital effects, and the Zuma power supply extends that commitment to clean power delivery. With 9 high-current isolated outputs each providing 500mA, this unit can handle an entire board of digital Strymon pedals without any current concerns.

The dual isolation technology is what sets the Zuma apart. Two stages of isolation eliminate both ground loop noise and AC line interference. During our testing, this supply produced some of the lowest noise floors we measured. Even running a high-gain distortion into a sensitive delay pedal, the signal stayed remarkably clean.

I particularly like the expansion capability. The 24V bus lets you connect additional Strymon Ojai units, scaling your power system as your board grows. This future-proofing is valuable for players who know their collection will expand over time. The automatic voltage switching means you can tour anywhere in the world without power concerns.

The included 9 pedal cables use right-angle to straight barrel connectors that work well with most pedal layouts. The chassis is robust and feels built for professional use. At 2.47 pounds, it is one of the heavier units we tested, but the weight suggests quality components inside.

While the Zuma is expensive, the combination of dual isolation, high current at every output, and expandability justifies the price for the right user. Strymon’s 2-year warranty is shorter than some competitors but the build quality inspires confidence.

Who Should Buy This

The Zuma is perfect for Strymon users and players who need expandable high-current power. If you run multiple digital delays, reverbs, or modulations that each need 250-500mA, this supply handles them all without current doubling cables. Touring professionals who value the dual isolation and international voltage compatibility will appreciate this unit.

Who Should Skip This

The price premium over the Truetone CS12 or Voodoo Lab PP3+ is significant for features many players may not need. If you do not run high-current digital pedals or plan to expand, the extra cost is hard to justify. Budget-conscious players should look at the CS7 or MXR options.

7. Truetone 1 SPOT Pro CS12 – Best for Large Pedalboards

The Truetone 1 SPOT Pro CS12 is the solution for players with serious pedal addictions. With 12 isolated outputs and 3000mA of total current capacity, this supply can power boards that would require two units from other manufacturers. The flexible current allocation means you can pull more from certain outputs as long as the total stays under 3000mA.

I tested the CS12 with a 12-pedal board featuring multiple digital effects including a Whammy pedal. The 9V AC output powered the Whammy directly without needing its separate wall wart, cleaning up my board significantly. Two 500mA outputs handled high-current digital units while the remaining ports covered analog pedals.

The switching power design runs cooler than traditional linear supplies, which should improve long-term reliability. After a four-hour rehearsal, the unit was barely warm. The included mounting brackets fit Pedaltrain boards perfectly, and the universal voltage input means this works anywhere in the world.

The variety of voltage options is impressive. You get 9V DC, 12V, 18V, and even 9V AC outputs all in one unit. This flexibility eliminates the need for separate adapters for oddball pedals. The cable set includes various lengths to reach pedals anywhere on a large board.

Truetone’s 5-year warranty matches the best in the business. The build quality feels substantial without being unnecessarily heavy. At 2 pounds, it strikes a good balance between durability and weight for a unit this powerful.

Who Should Buy This

The CS12 is designed for players with 10 or more pedals who want everything powered from a single supply. If you run large boards with diverse power needs including digital effects, high-voltage fuzz pedals, and maybe a Digitech Whammy, this handles it all. It is perfect for studio owners who need to power visiting musicians’ boards.

Who Should Skip This

If you have a compact or medium-sized board, the CS12 is overkill and may not even fit under smaller pedalboards. The price is higher than the CS7, so players with 6-8 pedals should save money with that option instead. Those sensitive to bright LEDs in dark venues might find the indicator lights distracting.

8. Voodoo Lab Pedal Power 3 PLUS – Modern High-Current Power

The Voodoo Lab Pedal Power 3 PLUS modernizes the classic PP2+ design with high-current outputs that modern digital pedals demand. All 12 outputs provide 500mA, eliminating the need to calculate which ports can handle your power-hungry effects. This is a significant upgrade over the original PP2+ for players using current DSP effects.

The hybrid DC transformer design with linear regulation produces audiophile-quality power that Voodoo Lab claims is completely free of hum and buzz. In our testing, the noise floor was impressively low even with high-gain pedals. The unit stayed cool during extended use, suggesting efficient power conversion.

I appreciate the X-LINK expansion ports that let you add Pedal Power X4 or X8 units as your board grows. This modularity means you will not outgrow the PP3+ even if your pedal collection doubles. The ultra-lightweight aluminum construction is a pleasant surprise, making this easier to mount than heavier steel units.

The two switchable 9V/12V outputs add flexibility for pedals requiring higher voltage. The 100-240VAC operation works worldwide, making this ideal for international touring. The compact 7 x 3.5 inch footprint fits under most pedalboards without issue.

Voodoo Lab’s reputation for reliability continues with the PP3+. The build quality is exceptional, with a clean internal layout that suggests careful engineering. While the mounting bracket is sold separately, the unit works well with Velcro mounting if you prefer not to drill.

Who Should Buy This

The PP3+ is perfect for serious musicians who need 12 high-current outputs with room to expand. If you run a large board with modern digital effects and want the confidence of Voodoo Lab’s reputation, this delivers. The lightweight design is ideal for players who count every ounce in their gig bag.

Who Should Skip This

The price point is steep for beginners or players with small boards. If you do not need 12 outputs or 500mA at every port, the original PP2+ or a Truetone CS7 offers better value. Those wanting included mounting hardware should look elsewhere or factor in the extra cost.

9. MXR DC Brick – Best Budget Option

The MXR DC Brick proves you do not need to spend $200 or more to get reliable pedalboard power. At around $105, it delivers 10 outputs with enough current to handle most pedals including high-draw units like the Digitech Whammy. While not fully isolated like premium units, it provides significant noise reduction compared to basic daisy chains.

I tested the DC Brick with a mixed board of 8 pedals. The 350mA per 9V output handled everything including a digital delay and multi-effects unit. The two 18V outputs at 800mA are particularly useful for high-voltage fuzz pedals that sound better at higher voltages. The red LEDs on each 9V output immediately show if there is a short, making troubleshooting easy.

The compact brick form factor sits nicely on top of or underneath most pedalboards. At 1.6 pounds, it is substantial without being heavy. The metal enclosure feels durable enough for regular gigging. MXR’s reputation for reliability is well-earned, and the 1-year warranty provides basic coverage.

While the DC Brick does not offer true isolation between all outputs, it does provide significant noise reduction compared to budget daisy chains. Most users report elimination of ground loop hum when switching from basic power solutions. For players with primarily analog boards, the lack of full isolation is rarely an issue.

The 800mA available on the 18V outputs is impressive at this price point. You can daisy chain multiple pedals off these high-current outputs if needed. The included cables are adequate though not premium quality. Most users will want to upgrade cables over time.

Who Should Buy This

The DC Brick is ideal for budget-conscious players building their first proper pedalboard. If you have 8-10 pedals and want to escape the noise of daisy chains without spending $200, this is your best option. It is perfect for bedroom players, weekend warriors, and anyone who wants reliable power at an affordable price.

Who Should Skip This

Professional touring musicians and recording engineers should invest in fully isolated supplies like the Voodoo Lab or Truetone options. The lack of complete isolation between outputs means some digital pedals might interact and create noise. Players running multiple high-current digital units simultaneously should look at the CS7 or DC7 instead.

10. Walrus Audio Canvas Power 5 – Boutique Compact Solution

Walrus Audio entered the power supply market with the Canvas series, and the Power 5 brings boutique quality to compact setups. At just 186 grams and roughly the size of a smartphone, this is one of the smallest isolated supplies we tested. Do not let the size fool you though, the 48W power capacity and isolated outputs deliver professional performance.

I tested the Canvas Power 5 on a small ambient board with a Walrus reverb, analog delay, and a few overdrives. The power was dead silent with zero noise floor increase. The stainless steel enclosure feels premium and should hold up to road use. The included C-style mounting brackets work well with most pedalboard brands.

The expansion capability is a standout feature. The Canvas Power 5 can link with other Canvas units or even connect to Strymon Zuma/Ojai systems via the 24V link. This interoperability is rare and valuable if you already own Strymon expansion units or plan to mix brands.

The 18-inch straight to right-angle cables included are high quality and the right length for small boards. The limited lifetime warranty shows Walrus Audio stands behind their product. At $189, it sits in the mid-range price bracket, offering boutique features without the premium price of a CIOKS or Strymon.

The separate power brick design keeps the main unit slim but does add a connection point. Some users prefer integrated designs like the DC7. The PDF-only instructions via QR code is slightly annoying for a physical product, though the setup is intuitive enough that most users will not need them.

Who Should Buy This

The Canvas Power 5 is perfect for players who want boutique build quality in a compact form. If you appreciate Walrus Audio’s reputation for excellent pedals and want matching power quality, this delivers. The Strymon compatibility makes it ideal for players who might expand with Zuma or Ojai units later.

Who Should Skip This

Players who prefer integrated power supplies without external bricks should look at the DC7 or CS6. With only 5 outputs, this will not grow with larger boards. Those wanting extensive long-term reliability data might wait for more user reviews to accumulate since this is a newer product.

Pedalboard Power Supply Buying Guide: What to Look For in 2026

Choosing the right power supply requires understanding a few key technical concepts. This guide breaks down what actually matters so you can make an informed decision without getting lost in electrical engineering.

Isolated vs Non-Isolated Outputs

Not all pedalboard power supplies are isolated. Isolation means each output has its own separate transformer winding and electrical path back to the power source. This prevents pedals from sharing ground connections, which eliminates ground loop hum and keeps digital clock noise from bleeding into analog circuits.

Non-isolated supplies connect all outputs to a common ground. While cheaper, these can introduce noise when multiple pedals share the ground path. Daisy chains are the worst offenders here, but some budget power supplies also lack true isolation between outputs.

For analog-only boards, non-isolated supplies like the MXR DC Brick often work fine. The moment you add digital pedals though, isolation becomes essential. That high-pitched whine you hear when running a digital delay alongside analog drives is digital clock noise leaking through shared ground paths. Isolated outputs solve this completely.

Understanding Current Draw (mA)

Every pedal draws a specific amount of current measured in milliamps (mA). Analog pedals typically need 10-50mA while digital effects can demand 100-500mA or more. Your power supply must provide at least the total current draw of all connected pedals combined.

To calculate your needs, add up the current draw of every pedal on your board. Most manufacturers list this in the manual or on their website. If a pedal draws 85mA, round up to the nearest standard output rating. Most isolated supplies offer 100mA, 250mA, or 500mA per output.

High-current digital pedals like the Line 6 HX Stomp (1A), Eventide H9 (500mA), or Strymon units (250-300mA) require special consideration. Look for supplies with dedicated 500mA outputs or use current doubler cables that combine two outputs into one higher-current port.

Voltage Options: 9V, 12V, and 18V

Most guitar pedals run on 9V DC, the industry standard. However, some pedals require or sound better at higher voltages. High-voltage fuzz pedals often run at 18V for increased headroom and different texture. Some delays and modulations accept 12V or 18V for expanded capabilities.

Never plug a 9V-only pedal into a 12V or 18V output. You will likely damage the pedal immediately. However, many modern pedals accept a range of voltages. Check your pedal’s manual to see if it can handle higher voltages. Running a pedal at higher voltage than specified will damage it. Running a high-voltage-capable pedal at 9V simply limits its potential.

Supplies like the CIOKS DC7 and Truetone CS series offer switchable voltages per output. This flexibility lets you power standard 9V pedals alongside 18V fuzz boxes from the same unit.

How Many Outputs Do You Need?

Count your pedals and add 20 percent for future expansion. If you have 7 pedals now, get at least a 9-output supply. It is frustrating to max out your power supply just as you find that perfect new pedal.

Consider your pedalboard size too. Small boards with 4-5 pedals work well with the Truetone CS6 or CIOKS SOL. Medium boards with 6-8 pedals match perfectly with the CS7 or Voodoo Lab PP2+. Large boards with 10+ pedals need the CS12, PP3+, or expandable systems like the Strymon Zuma with Ojai add-ons.

Mounting and Size Considerations

Pedalboard clearance is crucial. Slanted boards like the Pedaltrain Nano+ have minimal space underneath. Measure your board’s clearance before buying. The Truetone CS6 and CIOKS DC7 both fit under 1.25 inches, while bulkier supplies may not fit.

Most quality supplies include mounting brackets or templates for common board brands. Pedaltrain compatibility is almost universal. Temple Audio boards require specific mounting hole patterns found on CIOKS and some other brands. Velcro mounting works for lighter units but check that it holds securely during transport.

Expandability and Future-Proofing

Think about where your pedal collection might be in two years. Expandable systems like the Strymon Zuma with Ojai add-ons, Voodoo Lab PP3+ with X-LINK ports, or CIOKS systems with expansion units let you grow without replacing your entire power supply.

Some players prefer buying exactly what they need now and upgrading later. Others want one purchase that grows with them. Neither approach is wrong, but consider your budget and how likely you are to expand your board when making your choice.

Frequently Asked Questions About Pedalboard Power Supplies

Final Thoughts: Choosing the Best Pedalboard Power Supply in 2026

After three months of testing these 10 power supplies across various pedalboards and gigging scenarios, the differences between quality isolated power and budget options became crystal clear. The best pedalboard power supplies for guitarists eliminate the noise and reliability issues that plague daisy chains and cheap adapters.

For most players, the Truetone 1 SPOT Pro CS7 offers the perfect balance of features, reliability, and value. Its 7 isolated outputs including two high-current ports handle the majority of boards without breaking the bank. The lifetime warranty and global voltage compatibility make it a safe long-term investment.

If you demand the absolute best and run power-hungry digital pedals, the CIOKS DC7’s 660mA per outlet and 48W total capacity justify its premium price. The Voodoo Lab Pedal Power 2 Plus remains the industry standard for good reason, offering proven reliability that touring professionals trust worldwide.

Budget-conscious players should not feel left out. The MXR DC Brick provides solid performance for all-analog boards at a price that leaves room for more pedals. Just understand its limitations regarding isolation and plan accordingly.

Whatever you choose, investing in a quality isolated power supply will transform your tone more than any new pedal purchase. Clean power is the foundation everything else builds upon. Your ears (and your audience) will thank you.