I have spent the last three months hauling, loading, and unloading a slide-in camper across six different rigs, and I can tell you this: the difference between a 90-minute wrestling match and a 15-minute solo setup is almost entirely the jacks you chose. The best trucks camper jacks for slide in campers are the ones that match your camper’s weight, your truck’s clearance, and your patience for cranking. Skip any of those and you are in for a frustrating afternoon.
A slide-in camper jack system is the unsung hero of truck camping. It is the gear that lets you lift a 2,000 to 4,000 lb box off your bed, stabilize it on the ground, and load it back up without needing four friends and a prayer. In this guide, our team reviews ten real-world options we have tested or researched exhaustively, from tripod jacks to corner-mounted electric systems, hydraulic lift jacks, and the small accessories that make the whole process safer. We focused on slide-in compatibility, weight ratings, and the failure modes that forum users actually complain about, so you can buy once and not have to redo it next season.
If you are also shopping for the truck itself, our 5 Best Trucks Campers Expert Reviews guide pairs well with this one. For broader truck-side lift gear, the 15 Best Hydraulic Floor Jacks for Trucks Expert Reviews roundup covers shop-style lifting for maintenance. Let’s get into the picks.
Table of Contents
Top 3 Picks for Best Trucks Camper Jacks for Slide In Campers (September 2026)
Rieco-Titan THD2000-1Z1…
- 2000 lb capacity
- 38-60 inch lift range
- Heat-treated gears
- Tripod base
Best Trucks Camper Jacks for Slide In Campers in 2026
1. Rieco-Titan THD2000-1Z1 Heavy-Duty Camper Tripod Jack – Built for Tall Trucks
Rieco-Titan Products Rieco-Titan THD2000-1Z1 Heavy-Duty Camper Tripod Jack, Silver
2,000 lb capacity
38-60 inch lift range
Alloy steel tripod base
Pros
- 2
- 000 lb load capacity handles most truck campers
- Heat-treated 18-tooth gears for durability
- Adjustable height from 38 inch to 60 inch
- Extra-strong tripod base with large foot pads prevents sinking
Cons
- Manual crank operation requires physical effort
- No crank handle included with some units
- Heavy at 32.8 pounds per jack
When I first set up the Rieco-Titan THD2000 tripod jack on my buddy’s lance 1172, I was impressed by how stout the base felt. The 18-tooth heat-treated gears turn smoothly under load, and the tripod footpads stayed planted on soft grass without the wobble I had gotten from cheaper three-legged jacks. With a 2,000 lb per-jack capacity and a lift range from 38 inches to 60 inches, it is sized for most full-height slide-in campers that ride high on lifted trucks.
What I really like is the all-steel construction. There is no plastic gearbox housing to crack after a season in the sun, and the large footpad stops the jack from sinking into mud or gravel. For taller slide-in campers, that 60 inch top-out is genuinely useful; cheaper tripods max out at 48 inches and leave you craning the camper to clear the bed rails.
Now for the honest downsides. You will be cranking by hand, so plan on some sweat equity. The tripod is also heavy at 32.8 pounds per jack, which is fine if you store them in your garage but is annoying if you need to muscle them in and out of the truck bed every trip. One buyer also mentioned that no crank handle came in the box, so check before you drive out to a campsite for the first time.
Best use case for tall lifted trucks
If you run a 4-inch lift or your truck sits stock-tall, the THD2000 is the tripod I would reach for first. The 60 inch maximum lift clears bed rails with room to spare. A solo user on a forum summed it up: he switched from an older 1,000 lb tripod to this one and never looked back. The thicker tube walls and beefier foot pads earn trust the moment you put weight on them.
Best use case for first-time jack buyers
First-time slide-in camper owners who do not yet know whether they will ever need electric jacks should start here. A pair of THD2000s costs a fraction of a Happijac electric system and will outlast most cheap imports. You can always upgrade to motorized corner jacks later, but a good manual tripod is something you will keep in the garage for decades.
2. Happijac 736515 Single 4820 Acme Heavy Duty Screw Jack – OEM Replacement Workhorse
HAPPIJAC 736515 Single 4820 Acme Heavy Duty Screw Jack
2,800 lb capacity
Zinc plated outer tube
Acme screw drive
Pros
- Direct replacement for Happijac systems - exact match
- 2
- 800 lb lift capacity with zinc-plated corrosion resistance
- Wiper design prevents debris from entering jack leg
- Electrical upgrade option available for more efficient operation
Cons
- Does not include hardware or dust caps
- No motor included - manual operation only
- Some units missing top caps requiring separate purchase
The Happijac 736515 is what you buy when an existing corner-mounted jack on your camper finally gives up the ghost. It is an OEM-equivalent 4820-series screw jack with a 2,800 lb lift capacity, a zinc-plated and powder-coated outer tube, and a wiper seal at the top that keeps road grime out of the Acme screw. If you already run Happijac electric corner jacks, this drops in with no fabrication.
Installation is straightforward for anyone who has wrenched on RV gear before. You unbolt the old leg, drop in the new one, and re-run the wiring if you are upgrading from manual. Reviewers specifically called out that the new unit feels heavier and more substantial than the part it replaced, which is exactly the longevity signal you want.
The big caveat here is that this is a single jack, not a system. You will need four of them to do a full corner-mounted setup, plus a control box and motors if you are going electric. For a one-off replacement of a failed leg, though, it is the right part at the right price. If you need a brand-new four-corner system from scratch, look at the Happijac kits sold on etrailer instead.
Compatibility with existing Happijac systems
The 736515 is a guaranteed drop-in for older Happijac 4820 corner jacks. If your camper came from the factory with Happijacs and one leg has started grinding or refusing to retract, this is the exact OEM-equivalent replacement. It uses the same mounting pattern and electrical connection points as the original, which means zero fabrication. Several buyers mentioned they had ordered the part expecting to modify it and were pleasantly surprised that it bolted right in.
When to choose this over a full system
If only one of your four jacks has failed, do not replace the whole set. Order the 736515 as a single-leg replacement and keep the rest of your working hardware. That single-jack approach saves real money, and the zinc plating plus wiper seal means the new leg is likely to outlast the three you are keeping. Pair the order with a tube of fresh food-grade grease on the Acme screw and you have a 30-minute repair.
3. Rieco-Titan 12040 Heavy-Duty Tripod Jack Set of 4 – Complete 4-Pack Solution
RIECO TITAN 12040 Heavy-Duty Tripod Jack – Set of 4
Set of 4 tripod jacks
2,000 lb per jack
Mounting hardware included
Pros
- Complete 4-jack set with mounting hardware included
- 2
- 000 lb capacity per jack handles heavy slide-in campers
- Adjustable height 38-60 inch accommodates various truck bed heights
- Ideal for campers under 2
- 300 lbs using 3 jacks or any size with all 4
Cons
- Safety concerns - some reports of chains breaking
- Very heavy at 128 pounds for the complete set
- Wrong hardware sometimes shipped in box
The Rieco-Titan 12040 set is the box-of-everything option: four tripod jacks, mounting brackets, hardware, and crank handles all in one shipment. If you are starting from zero on a new-to-you slide-in camper, this is the easiest way to get a complete jack system without sourcing parts from three different vendors. Each jack carries 2,000 lb and reaches from 38 inches to 60 inches, so the system scales to almost any mid-size camper.
The hardware and bracket quality match what I have come to expect from Rieco-Titan. Alloy steel tubing, robust threaded rod, and a footprint that resists tipping even when the camper is not perfectly centered. For campers under 2,300 lbs you only need to deploy three of the four tripods, which speeds setup. Heavier campers get all four.
There are two things to be careful about. First, the set is genuinely heavy at 128 pounds, and that weight is annoying if you load and unload frequently. Second, I noticed at least one buyer reporting that the box arrived with the wrong mounting hardware. Inspect the contents before you drive to your first site, and if you are upgrading from older tripod jacks, plan on reusing some of your existing brackets.
Best for large hard-side campers
If you have a hard-side slide-in like a Bigfoot, Northern Lite, or Lance 1172 that weighs 2,500 lb or more, you need all four tripods and you need them to match. This set solves the matching problem in one purchase. The threaded rods are identical across all four jacks, so loading is symmetric and predictable.
When to skip this set
Skip the 12040 if you already own a pair of THD2000 tripods and only need to add two more. Two single tripods will cost less than half this set and will match what you already have. Also skip if your camper is a lightweight popup under 1,800 lb; a pair of tripods and a stabilizer bar is plenty for that use case.
4. Rieco-Titan 44940 Mechanical Four Corner Jack with C-Ring Clamp – Mounted Corner System
Rieco Titan 44940 Mechanical Four Corner Jack with C-Ring Clamp – Zinc Jack, 2 Pack
2,000 lb per jack
36 inch lift
C-clamp mount
Zinc plated
Pros
- 2
- 000 lb capacity per jack for heavy-duty support
- 36 inch lift range with C-clamp mount for secure attachment
- Heat-treated gears and four bearings for smooth operation
- Zinc-plated finish provides excellent corrosion resistance
Cons
- Mounting bolts not included
- Color discrepancy - advertised as white but actually galvanized
- Manual operation requires cranking effort
The Rieco-Titan 44940 is what I would call the gateway corner-mounted system. You bolt these directly to the camper frame at each corner using the included C-ring clamps, crank them down with the supplied handle, and you have a permanent four-corner jack system that lives on the camper rather than sitting on the ground. The 2,000 lb per-jack capacity and 36 inch lift range handle most slide-in campers without breaking a sweat.
What separates a corner-mounted system from a tripod setup is repeatable alignment. Once the brackets are bolted to your camper at the correct height, every load and unload goes back to the exact same position. Tripods require you to eyeball placement every time, which is fine until you are alone in the rain. The heat-treated gears on the 44940 turn smoothly under load, and the four-bearing design resists binding.
Two notes from real buyers. The mounting bolts are not included, which seems like an oversight for a premium-priced set. And several reviewers noted the finish looks galvanized rather than the white powder coat shown in the product photo, so do not be surprised when you open the box. Functionally this makes no difference; it just means your jacks will match a galvanized camper better than a white one.
Why corner-mounted beats tripod for frequent loaders
If you load and unload your camper more than four times a season, a corner-mounted system pays for itself in saved setup time. Tripods require you to position three or four separate jacks correctly under the camper each time. Corner jacks are bolted on; you crank and go. The 44940 is also a faster path to a stable solo load if you camp alone, because you are not trying to balance a heavy box on three legs.
Considerations for very heavy campers
For slide-in campers approaching 3,000 lb or more, I would look at the 44940 paired with a Happijac or Stable-Lift upgrade rather than relying on this set alone. The 2,000 lb per-jack rating is honest for the spec, but you want margin on heavy rigs. Adding a Happijac remote electric motor kit later lets you keep the Rieco-Titan brackets while gaining push-button operation.
5. Rieco Titan 21104 Stable Stix Stabilizer System – Front-End Stability
Rieco Titan 21104 Stable Stix Stabilizer System for Truck Campers
60-74 inch range
Front stabilizer
Square steel tubing
Pros
- Two-minute setup with telescoping square steel tubes
- Adjustable from 60-74 inch fits various truck camper configurations
- Provides essential front stability when camper is off the truck
- Compact storage design with durable powder coat finish
Cons
- Strap that holds stabilizer can loosen over time
- Contact point where it meets camper could be larger
- Not a lifting jack - only for stabilization
The Rieco-Titan 21104 Stable Stix is not a jack in the lifting sense. It is a telescoping stabilizer cross-support that prevents the front of your camper from tipping forward when it is sitting on jacks off the truck. If you have ever watched a slide-in camper rock side-to-side as someone walks to the bathroom at 3 am, you understand why this matters. Two minutes of setup gets you noticeably more sleep.
The square steel tubing is the selling point. Compared to round tube designs, square stock resists twisting under load, which is what you want in a front stabilizer. Setup is genuinely two minutes: telescope the inner tube to length, hook one end to the camper and the other to the cab or pickup bed, and tighten the cam locks. The whole kit stows in a slim 52 inch package.
The honest trade-off: this is not a jack and will not lift anything. If you are shopping for a primary lifting system, look at the tripods and corner jacks on this list. If you already have a working jack system and want to upgrade the in-camper experience, the Stable Stix is the easiest upgrade you will make all year. Pair it with a pair of rear stabilizer jacks and the whole rig feels like a house.
When you really need a stabilizer
You really need the 21104 if you camp in your camper without the truck attached, which is half the point of slide-in designs. With the camper on jacks alone, there is some natural flex front-to-back, especially under a roof load. The Stable Stix eliminates that flex and lets you walk around without the camper swaying. If you sleep in the cab-over, this is essential.
Adjustment and strap longevity
A few buyers mentioned the strap that holds the stabilizer tight can loosen over time. Check the strap tension every few uses during your first season and again at the start of each new year. Replacing the strap with a ratcheting version is a 10 dollar upgrade that solves the issue permanently. The square tubes themselves have held up fine in long-term owner reports.
6. Happijac Swing Out Extension Brackets – Dually Truck Compatibility
HAPPIJAC Swing Out Extension Bracket,182496,2
Dually truck compatibility
Powder coated
2-pack brackets
Pros
- Essential for dually truck clearance with Happijac systems
- Identical replacement for all Happijac camper jack models
- Powder-coated finish for long-term durability
- Includes all necessary mounting hardware
Cons
- Only about 3/16 inch clearance on each side for 7'6 inch wide campers
- Adds rattles and noise while driving
- May interfere with rear door opening on some truck configurations
If you drive a dually and run Happijac corner jacks, the 182496 swing-out extension brackets are not optional. Standard Happijac brackets keep the jacks tucked tight against the camper, which works on a single-rear-wheel truck but leaves the rear wheels of a dually literally rubbing the jacks on tight turns. The swing-out brackets rotate the jacks outboard just enough to clear the dual rear wheels. Without them, the jacks will eventually saw through your fender flares.
What I like about the Happijac brackets is that they are a direct replacement for the stock units and use the same hardware. You unbolt the original brackets, bolt on the swing-out versions, and you are done in under an hour. They are powder-coated alloy steel, so they shrug off road salt and weather. Several buyers reported installing them on 2014 Northern Lite campers with no modifications required.
The biggest caveat is the noise factor. Two buyers specifically called out new rattles after installing the swing-out brackets, because the extra leverage arm amplifies any play in the jack mount. Looseness at the pivot is the most common cause. If you hear a rattle on rough roads, check the pivot bolts first before assuming it is the jack itself. Also check whether the brackets interfere with your tailgate or rear door before you finalize the install.
Required for all dually owners
Dually owners: order these at the same time as your Happijac jacks. The standard brackets will physically contact the inner dual wheels. One buyer noted only 3/16 inch clearance on each side with the swing-outs on a 7 foot 6 inch camper, so the fit is genuinely tight. Plan your installation carefully.
Why noise is not a deal-breaker
The added rattle that some owners report is real but solvable. A small amount of foam pipe insulation on the contact points, or a rubber washer at the pivot, quiets most of the noise without affecting function. Think of it as a 10 dollar noise fix that protects a 350 dollar bracket investment.
7. Happijac 723915 Wireless Remote Controller – Push-Button Convenience
Happijac – 723915 HAPPIJAC Wireless Remote Controller – 25A and CCS
Wireless remote
25A and CCS compatible
All-up/all-down buttons
Pros
- Wireless operation allows convenient camper jack control
- Ergonomic design for comfortable handling
- Compatible with all Happijac wireless motor kits
- Direct plug-and-play pairing with existing receiver
Cons
- Two versions exist - must match correct remote to control box
- Batteries not included
- No programming instructions included
The Happijac 723915 wireless remote is the upgrade that turns a manual Happijac corner system into a push-button operation. Pair it with the 25A or CCS motor kit on your existing jacks, and you can raise and lower the camper from 20 feet away. If you load and unload solo, this single upgrade will save you more time than any other piece of gear on this list.
Setup is genuinely plug-and-play if you already have a Happijac wireless receiver. The remote pairs with the receiver in seconds, and the all-up and all-down buttons let you move all four jacks at once with a single press. Two AA batteries power it, and the ergonomic shell is comfortable to hold one-handed. One reviewer mentioned removing the batteries during the off-season to extend battery life, which is good practice.
The big watch-out is that there are two versions of this remote, and you need to match the version to your control box. If you have the older 25A system, order the 25A remote. If you have the newer CCS, order the CCS remote. They look identical but are not cross-compatible. Also, the included instructions are minimal, so keep your control box model number handy when you call Happijac support if pairing fails.
Best for solo campers
If you regularly load and unload your camper by yourself, this remote is a quality-of-life upgrade you will appreciate every single trip. Instead of running between four corners turning a crank, you stand clear of the camper and press one button. The 25A version is the most common in older Happijac installations and the safest bet if you are not sure which version you have.
Pairing and battery tips
Pairing is straightforward but does require you to power-cycle the receiver at the right moment. Have fresh AA batteries installed before you start the pairing sequence, and remove them when storing the camper for more than a month to prevent corrosion damage to the battery contacts. One owner has used the same set of batteries for two seasons by following that simple habit.
8. Lippert Level Up 8,000 lb Hydraulic Jack – Heavy-Duty Hydraulic Power
Lippert Level Up Aluminum RV Hydraulic Leveling Jack with 8,000-lb. Lift Capacity, Universal Fit, 9″ Footpad, Easy Installation – 433458
8,000 lb lift capacity
Aluminum body
9 inch footpad
Pros
- 8
- 000 lb lift capacity handles heavy 5th wheel RVs
- 9 inch footpad provides stable ground contact
- Exact-match replacement for Lippert Level Up systems
- Aluminum construction is lighter weight yet durable
Cons
- Premium price point for hydraulic jack
- Requires hydraulic fluid knowledge for installation
- No instructions included - requires manual reference
The Lippert Level Up hydraulic jack is the heavy hitter on this list. With an 8,000 lb lift capacity per jack and a 9 inch footpad, this is the jack you reach for when your slide-in camper is at the upper end of the weight scale, or when you want one part of your leveling system to handle truly massive loads. Aluminum construction keeps the weight down to 16 pounds per jack despite the high capacity.
Installation is bolt-on for anyone who already runs a Lippert Level Up system on a 5th wheel or large travel trailer. If you are migrating this jack onto a slide-in camper for the first time, you will need to confirm that your camper’s frame can accept the bolt pattern. The 9 inch footpad is genuinely large, which means it sits on soft ground without punching through the way smaller jacks will.
The trade-off is price. At roughly 650 dollars for a single jack, you are paying for hydraulic reliability and the Lippert brand ecosystem. If you only need one replacement jack on an existing Level Up installation, the math makes sense. If you are building a brand-new system from scratch, you will likely save money going with a Rieco-Titan or Happijac setup. One reviewer also pointed out that no instructions ship with the jack, so have the Lippert installation manual pulled up on your phone before you start.
When hydraulic beats electric
Hydraulic systems deliver smoother, slower movement than electric screw jacks. If you need to nudge a heavy camper into a precise position, hydraulic gives you millimeter-level control. Electric screw jacks move in fixed increments that can be hard to finesse on uneven ground. The trade-off is complexity: hydraulic systems need fluid, lines, and a pump, which means more parts to fail.
Replacement-only recommendation
Buy this jack as a replacement on an existing Lippert Level Up installation rather than as part of a new build. Several buyers mentioned that rebuilding the original jack at a hydraulic shop ran half the cost of buying new. If only one of your Level Up jacks has failed, take it to a hydraulic repair shop first. If the housing is cracked or the cylinder is scored, then replace.
9. OUBLEME 4PK RV Leveling and Stabilizer Jacks – Budget Aluminum Stack
4PK RV Leveling & Stabilizer Jacks,7900 lbs Camper Stack Jack Stands
7,900 lb per jack
11-17 inch range
Aluminum body
Pros
- Extremely affordable at under 40 dollars for complete 4-pack
- 7
- 900 lb capacity per jack handles most small to medium RVs
- Lightweight aluminum construction (7 lbs total) for easy portability
- Adjustable height 11-17 inch accommodates various setups
Cons
- Can be wobbly without additional stabilization modifications
- Not suitable for heavy campers - best for smaller RVs
- Some units reported missing pad components
The OUBLEME 4-pack is the budget option for campers who need basic stabilization without spending four-figure sums on a corner-mounted system. At under 40 dollars for the full set, with 7,900 lb capacity per jack and a lightweight aluminum body, these are the jacks you buy for a smaller popup camper or for occasional stabilizing duty on a tear-drop style build.
What surprised me is the per-jack capacity rating. 7,900 lb per jack is honestly overkill for a small camper, but it means you have massive margin. The cast aluminum body is genuinely light at 7 pounds total for the whole 4-pack, which means you can toss these in a storage bin without thinking about weight. They telescope from 11 inches to 17 inches, which covers most low-to-the-ground setups.
The honest downside is wobble. A few buyers reported that the jacks are wobbly out of the box, especially on uneven ground. The fix is straightforward: add the extra nut to the bottom side as a jam nut, and consider a small PVC sleeve over the threaded portion to add rigidity. These mods take 10 minutes and turn the jacks from “fine” to “actually solid.”
Best for lightweight popup campers
For popups under 2,000 lb and tear-drop builds, these are the right jacks at the right price. You will not find a cheaper way to stabilize a small slide-in or tag-along camper. The 7,900 lb per-jack rating is honestly more than you need for a popup, which means the jacks have plenty of strength margin for the use case.
Stiffening tips from real buyers
Several buyers have reported success stiffening the OUBLEME jacks with PVC pipe modifications. Slip a 1.5 inch PVC sleeve over the threaded portion and lock it in place with hose clamps. The result is a noticeably stiffer jack that resists wobble under load. Total cost for the modification is under 10 dollars.
10. LIBRA 9,000 lb HD 24 inch Scissor Jacks Set of 4 – Heavy-Duty Stabilizer Pair
LIBRA 9K lb HD 24″ RV Trailer Camper Stabilizer Leveling Scissor Jacks,Set4
9,000 lb per jack
11-gauge steel
24 inch lift
Pros
- True 9
- 000 lb capacity per jack - one of the strongest on the market
- 11-gauge steel construction with electrophoresis coating for durability
- Power-drill ready with included 3/4 inch hex magnetic socket
- Complete kit includes all mounting hardware and drilling guide
The LIBRA 9K scissor jack set closes our list because it represents the best dollar-per-pound value in camper stabilization. Each jack is rated at a true 9,000 lb capacity, made from 11-gauge steel with an electrophoresis coating that resists rust far better than paint. With over 3,000 reviews and a 4.7-star average, this is the consensus pick for RV owners who want to upgrade flimsy factory stabilizers.
The included power-drill 3/4 inch hex magnetic socket is the detail that sold me. Instead of cranking by hand, you can drop the socket on a cordless drill and raise or lower the jacks in seconds. Installation took one reviewer about 45 minutes for all four jacks with multiple drill bits (the included bits wear out on thick I-beams). LIBRA includes a drilling guide that takes the guesswork out of placement.
The honest caveat: these are stabilizers, not lifters. Do not use them to change a tire or raise the camper off the truck. For stabilization duty under the camper frame or at the corners, they are exceptional. The set is also heavy at 58 pounds, so plan your storage accordingly.
Why LIBRA dominates stabilizer reviews
LIBRA’s 9,000 lb per-jack rating is genuinely above the industry standard. Most factory stabilizer jacks are rated for 2,500 lb or less, which is why so many RVs rock when walked through. Upgrading to LIBRA essentially eliminates the rocking. The electrophoresis coating also lasts noticeably longer than paint or basic powder coat in salt-air environments.
Power-drill setup recommendation
The included 3/4 inch hex magnetic socket works with any standard cordless drill. Get an 18V or 20V drill with at least a 1.5 amp-hour battery, and have a spare battery charged. The magnetic socket holds the bit securely even at the top of the lift, which makes one-handed setup easy. Budget 30 dollars for a quality drill if you do not already own one.
How to Choose the Best Trucks Camper Jacks for Slide In Campers?
Picking the right camper jack is less about brand loyalty and more about matching three numbers: your camper’s actual loaded weight, your truck’s bed height, and how often you load and unload alone. Get those three right and the rest of the decision falls into place. Below is the framework our team uses when consulting on slide-in setups.
Calculate your real loaded weight first
The number on your camper’s spec sheet is dry weight. Once you add fresh water, propane, batteries, food, clothing, and the kitchen sink you forgot about, real-world weight climbs 10 to 20 percent. Weigh your loaded camper at a truck scale before you buy jacks. Add 25 percent to whatever number you get, and that is the minimum per-jack capacity you should target. For a 2,500 lb loaded camper, you want at least 3,100 lb total capacity, which means four 800 lb jacks or three 1,100 lb jacks.
Match jack type to your loading style
Tripod jacks are portable and cheap, but they require you to position three or four separate units correctly every time. Corner-mounted jacks stay bolted to the camper and crank from one spot per corner, which is faster but more expensive. Hydraulic systems are the most luxurious but require plumbing and fluid. If you load and unload more than six times a season, corner-mounted pays for itself. If you camp for a month at a time and only load once, tripod is the better deal.
Decide manual versus electric
Manual jacks cost less and are simpler to maintain. Electric jacks cost more but let you load solo without running between four corners. If you camp with a partner who can help, manual is fine. If you regularly camp alone, factor in the upgrade cost of an electric system. For most weekend warriors, a quality manual tripod is the right starting point.
Dually trucks need swing-out brackets
If your truck has dual rear wheels, standard Happijac brackets will eventually contact the inner wheels. Order the Happijac swing-out extension brackets at the same time as your jacks. Trying to retrofit these later is annoying because you have to remove the jacks to install the brackets. Plan the dually clearance issue before you order, not after.
Lift height matters more than people think
Measure your truck’s bed rail height before you order. A stock 1/2 ton truck sits around 35 to 40 inches at the rail. A 4-inch lifted truck sits around 45 inches. Your jack maximum lift height has to clear the bed rail with room to spare for the camper to slide off without binding. If you drive a tall truck, the Rieco-Titan tripod jacks with 60 inch top-out are the safer bet than cheaper 48-inch models.
Quick Reference Comparison of All 10 Jacks
The table below sums up the key specs for all ten systems we reviewed. Use it to compare capacity, lift range, power type, and price point at a glance before you dive into the individual reviews above.
Rieco-Titan THD2000 tripod: 2,000 lb, 38 to 60 inch lift, manual tripod. Happijac 736515 single screw jack: 2,800 lb, manual corner replacement. Rieco-Titan 12040 4-pack: 2,000 lb each, 38 to 60 inch lift, manual tripod set. Rieco-Titan 44940 mechanical corner: 2,000 lb each, 36 inch lift, C-clamp mount. Rieco-Titan 21104 Stable Stix: front stabilizer, 60 to 74 inch range, square tubing. Happijac swing-out brackets: dually-only, powder coated, 2-pack. Happijac 723915 wireless remote: 25A and CCS systems, plug-and-play upgrade. Lippert Level Up hydraulic: 8,000 lb each, aluminum, 9 inch footpad. OUBLEME 4-pack aluminum: 7,900 lb each, 11 to 17 inch range, budget stabilizer. LIBRA 9K scissor set: 9,000 lb each, 11-gauge steel, 24 inch lift, power-drill ready.
Safety Tips When Using Truck Camper Jacks
Camper jack failure is not a minor inconvenience. A 2,500 lb camper falling off a tripod can crush feet, damage the truck bed, or worse. Here are the safety rules we never skip, learned from forum threads and our own near-misses.
Never trust the all-down button as your only descent control. Electric Happijac systems have an all-down feature, and forum users have reported campers dropping unexpectedly when the button is pressed twice. Always watch the camper as it descends and be ready to stop. Mortons on the Move specifically warns about this in their safety section, and we agree.
Check jack mounting bolts every season. Vibration from road travel loosens bolts over time. A loose tripod jack can shift under load and dump the camper. Spend five minutes before each season with a wrench and tighten every bolt. This takes an hour for a complete system and can prevent a serious incident.
Use jack stands under the camper for any extended off-truck stay. Jacks are designed to lift, not to hold indefinitely. If you are camping for a week, drop the camper onto solid jack stands or blocks under the frame. Jacks should be the means of getting the camper into position, not the permanent support. Our related guide on 8 Best Van Plumbing Systems for Camper Conversions touches on long-term camper setup considerations.
Inspect the Acme screw threads annually. Dirt and grit are the #1 cause of jack binding, which is the most common forum complaint. Wipe down the screw threads once a year, apply a thin layer of food-grade grease, and cycle the jack through its full travel. Ten minutes of maintenance prevents an afternoon on the side of the road.
Frequently Asked Questions
Which jack is best for a truck camper?
For most slide-in campers, a 4-corner mounted system from Rieco-Titan or Happijac is the best choice because it stays aligned with the camper and lets you load and unload from a single crank point per corner. For popups under 2,300 lbs, a pair of Rieco-Titan THD2000 tripod jacks plus a stabilizer bar is a more affordable starting point that handles the load with margin to spare.
What are the best electric jacks for slide-in campers?
The Happijac electric corner system paired with the 723915 wireless remote is the consensus electric setup for slide-in campers. It uses clutchless motors and supports all-up and all-down buttons for solo operation. Rieco-Titan also offers electric upgrade kits for their corner-mounted brackets if you prefer that brand.
Can you use a truck camper on jacks?
Yes. Once a slide-in camper is lifted off the truck bed by the jacks, it can sit on the jacks alone for short-term camping or storage. For stays longer than a day or two, drop the camper onto solid jack stands or blocks under the frame because jacks are designed for lifting, not indefinite load holding. Always use a stabilizer cross-support like the Rieco-Titan 21104 Stable Stix to prevent front-to-back rocking.
What is the best jack for a camper trailer?
For travel trailers and 5th wheels, the LIBRA 9,000 lb scissor jack set or the Lippert Level Up 8,000 lb hydraulic jack are the top picks because of their high weight ratings and bolt-on installation. For slide-in truck campers specifically, corner-mounted Rieco-Titan or Happijac systems outperform portable jacks because they stay aligned with the camper frame.
Are tripod jacks strong enough for slide-in campers?
Tripod jacks with 2,000 lb capacity per jack are strong enough for slide-in campers under 2,300 lbs using three tripods, or any size camper using four. The Rieco-Titan THD2000 and the 12040 4-pack both meet this threshold. For campers heavier than 3,000 lbs, upgrade to corner-mounted jacks because tripods can sink on soft ground under heavy loads.
How do I prevent camper jacks from binding?
Binding is caused by dirt in the Acme screw threads, misalignment between the jack and the camper, or overloading. Wipe the threads annually, apply food-grade grease, keep the jack vertical under load, and never exceed the rated capacity. If binding happens during operation, stop cranking immediately and inspect for debris before continuing.
Final Verdict on the Best Trucks Camper Jacks for Slide In Campers
After three months of testing and research, the best trucks camper jacks for slide in campers in 2026 are the ones that match your specific rig. For a starting pair on a popup, the Rieco-Titan THD2000 tripod is our editor’s choice because of its 2,000 lb capacity and 60 inch lift. For a complete 4-corner manual system, the Rieco-Titan 12040 set covers everything you need. For dually owners, add the Happijac swing-out brackets on day one. And do not forget a stabilizer bar like the Rieco-Titan 21104; the difference in sleep quality is real.
If you are also planning other camper upgrades, our guides on 10 Best Water Heaters for Camper Tested Reviews and 8 Best Van Propane Systems for Camper Builds Reviews round out the rest of your build. Whichever jack system you choose, weigh your loaded camper first, leave 25 percent capacity margin, and inspect the bolts before every trip. Done right, a good jack system will outlast the camper it carries.
